How do i fix this

how do i fix this

Attached: PXL_20220805_185421042.MP.jpg (666x750, 544.3K)

Floor on a can

Ignore it

idk

Attached: 1630386594256.jpg (226x252, 29.51K)

Move.

End your visit to the leaning tower of pisa

pretend that it how its supposed to be

Attached: 1348298789879.png (934x717, 109.07K)

You don't. they'd have to jack up and rebuild the whole crumbling foundation. You didn't buy that shithole did you?

Attached: 1643667676454.gif (220x292, 39.56K)

Demolition.

Demolish it.

Not enough information to determine what the cause is. Could be a foundation issue, could just be an old house. Not all uneven floors are a cause of concern.

Break the glass vial in level....problem solved.

Depends on what is underneath. If it's floor joists it's a pretty easy fix. If it's concrete, it depends on cause. A shitty finisher can have low spots and you just float a self leveler. If it is structural failure you should learn to live with it or bring some cash to jack that shit back up and fill underneath.

Attached: 1659782382239242.jpg (1024x965, 65.79K)

An hero

Just stop fucking obsessing about it. It's fine. You're so fucking ocd if shit like this bothers you. Get a fucking life.

wdym
bubble clearly shows it's level

you are a certified retard. the bubble is level, then the floor moves out from under the level.

floor jacks and new posts.

Attached: 1659631206749553.png (800x800, 378.12K)

Buy a non-bent level.

i bought this house

yes

50 years old

I can feel that I am walking downhill when I go through this area.

just refill the water

Dude, they have to jack up the entire floor and rebuild the fucker. Stop complaining about shitty rentals and move out.

you dont wanna know unless you want to be very stressed/annoyed because you would have to rip out the floors and level them and that isnt cheap so really just get over it

Attached: IMG_4055.jpg (600x400, 99.14K)

You don't

also that level looks like shit

How large of an area is uneven?

ur just proving my point dumbass
if all the different parts of the floor are level indivudually, how can it not be level as a whole?

Destroy the entire house, maybe even the neighbourhood and start from scratch, actually fuck it, just turn that house and everywhere 50 miles around it into ground zero and just fucking nuke it.

You on a subfloor? Slab? First story?

Put it in the microwave til the plastic is soft. Should allow you to bend it until the edges touch the floor. Good luck user.

The door in the background isn't level either, look at the gap. If it moves normally that means it's not a new problem and you can just ignore it.

so close

second floor

most of it