I'm back

I'm back

Attached: PXL_20220225_114913122.jpg (1440x1440, 632.28K)

Fuck all the naysayers

Attached: PXL_20220225_201757192.jpg (1080x1080, 431.15K)

back for cock? figures...

Attached: 1450445881580.gif (150x148, 929.73K)

Long live the superior continent Europe

Attached: PXL_20220225_202026999.jpg (1080x1080, 387.25K)

great wirering

And it's all thanks to user

Great???? Thats a fucking mess. Almost made me lose my breakfast

oi, the first pic is before, the 2nd is after

anything wrong with the 2nd pic?
And pls don't get started about "overfilling" or "fire hazard", there are non-american standards in my country

You have what seems to be 9 lines coming into a common point in a light housing. I don't care where you are from thats just a stupid idea. The celing seems to be a concrete product not gyprock so i am going to assume you where not the sparky who wired it up rather the person who just shoved it all back in. If that is the case it's the best you can do and good job. If you are the sparky then all i can say is shame and if you ever came onto my job site you whould be out on your ass so quick

>what seems to be 9 lines
7x L,N&GND and one switch wire.
>thats just a stupid idea
fucken why
>you where not the sparky
correct

explain, i missed the earlier thread

Wasn't very interesting tbh
>post for help on how to get wires to fit
>get bunch of retards telling me "so many wires is illegal" "it's a fire hazard" "get a bigger box" and basically ppl applying american regulations to a non-american electrical installation

So here I am rubbing it in people's faces that I succeeded in getting the wires to fit cause I'm a bitter person

Don't give a shit

You give enough shits to post a reply, dumbfuck

You said non american. So that tells me you are running at least 210V and you your lights being 2 core it's split for mains pp. Assuming a 16amp breaker you will be popping your breaker every two seconds. And by tucking them up like that all you have achieved is a fail point if they ever need to be pulled out again when some rat decideds to an hero by chewing on a live wire

That was in referencing to you claiming people got angry or some shit. Yawn.

>Assuming a 16amp breaker you will be popping your breaker every two seconds
wtf?
are you dumb?

>people got angry
Never said that, lrn2read

The only entertainment we're going to enjoy is watching your house burn down. Set up a stream please

WTF sort of retarded shit you have going on there user? You seriously need to consider hiring a real electrician to rewire your home correctly. I've wired a few houses in my life, and I've never seen anything that fucked up and I do recall dealing with a kitchen wired with extension cords and electrical tape.

OMG THAT'S NOT THE WAY YOU DO THE WIRES RIGHT

The only thing you're going to accomplish is creating an annoyance when toy have to reset the breaker more often

it's all 2.5mm2 solid wire.
The breaker would activate before any of the wire gets hot enough to cause a fire

The standard here is: go from breaker to a central box (that's directly above a light), go from central box to other central boxes, lights, switches and outlets

YES IT IS

Shit was wired this way for 30 years, I only added ground to all the outlets.
I think it'll be fine