Is isopropyl alcohol and cotton buds and kitchen towel the best way to clean CPU, GPU, and stock fans?

Is isopropyl alcohol and cotton buds and kitchen towel the best way to clean CPU, GPU, and stock fans?

Attached: 1bd.jpg (674x615, 70.65K)

imagine wasting time with this shit

Just use wd40

What shit is that cleaning my computer tower?

WD40 would leave too much residue and may conduct electricity. Too much of a risk

Yes but make sure it's 99%

It is thanks user.

>pilk

Interesting. What is the exact ratio of Pepsi to milk to make pilk? Could I use whole milk in my pilk instead of 2%?

2% is watery.

Attached: sample_d5a4f1f7fac4fcc2498bce390cafdf40.jpg (850x1093, 625.56K)

meanwhile i cleaned thermal paste off my cpu with 70%

I only need to remove dust. I don't need to replace anything.
70/30 milk to pepsi. Whole milk is fine.

Sure that probably won't do any harm until it gets on the contacts

Dust? Then why not just use compressed air?

Because that makes the fan blades spin too fast and damages them duh. I don't want to kill my Pc.

Are you serious? Or just retarded

>Everyone else says that using compressed air makes the blades spin too fast
>One retard on Any Forums who clearly has an ulterior motive tries to claim It doesn't.
Okay. Not falling for your bullshit.

Thanks fren. What is the purpose of such a drink? Do the milk and Pepsi react in some way like ice cream does with soda to make a float?

Attached: 6c20e8c5b966c8f83877e655e587137c.jpg (1003x1416, 638.74K)

It's just a fun drink. Like milk with more kick and flavour.

Every source I found says that if you keep a small distance between the air and the fans you will be fine. Especially if you use canned air which doesn't have too much pressure compared to a compressor

Never built a PC in my life before.
When my 5600G arrived, i used denaturated alcohol and it worked just fine.
Isopropyl (in this case) is just a bad meme.

>Source
So you won't test it out yourself. Lmao.

If denatured works why wouldn't isopropyl? It's not exactly expensive.